Chalet Exhibitor Rules

To make ABACE a successful event for all participants, ABACE exhibitors must review and abide by all ABACE2018 rules. Additionally, exhibitors must abide by the Exhibitor Contract Terms & Conditions.

• Badges
• Catering
• Cleaning
• Co-exhibitors
• Defacing Property
• Direct Selling
• Drawing Approval
• Electrical Service
• Exhibit Hours
• Exhibitor Service Desk
• Exhibitor Service Kit
• Exhibitor-Appointed Contractors (EACs)/Stand Builders/Third-Party Contractors
• Extended Hours
• EAC Fees
• Fapiao
• Fire Safety
• First Aid
• Furniture Procedures
• Interior Design Procedures
• Mailing List Updates
• Marshaling Yard
• Membership
• Mock-ups
• Move-in
• Move-out
• Noise Levels
• Official Service Contractor
• Parking
• Payment Methods
• Performance Bond
• Safety Regulations for Chalet Construction
• Security
• Shipping/Storage
• Staffing
• Terms & Conditions
• Trademark Usage
• Unmanned Aircraft Systems (UAS), Remote-Controlled Aircraft and Helium Balloons
• Value Added Tax (VAT)
• Visa Invitation Letters
• Waste Removal

Badges

Exhibitor badges are required for exhibitor access to the exhibit halls, chalets and static display of aircraft.

Due to required security procedures, all exhibitor booth personnel that wish to access the show floor must provide their picture on site at ABACE registration to obtain their badge. Pictures will not be printed on individual badges, but will be electronically monitored by security personnel before entering the exhibit hall.

Exhibitors from mainland China will be required to provide their name and company in Chinese, as well as their Chinese identification card number. This information will be printed on the back of the exhibitor badges, as required by the public police.

All exhibitor booth personnel and attendees from countries outside of mainland China must include their passport number on their registration and be prepared to present their passport at registration to obtain their badge.

ABACE2018 badges are for the use of one individual for the duration of the show and are non-transferable. Attendees and exhibitors will be assessed penalties for badge swapping. Random identification checks will be instituted.

Exhibitors will receive an allotment of complimentary badges based as follows:

Exhibitors may purchase additional badges online or on site at the discounted rate of 900 RMB.

Exhibitors may access exhibitor badge registration through the ABACE2018 Exhibitor Dashboard and are encouraged to register all stand and static display personnel online in advance to avoid waiting in lines on site.

All badges will be held for on-site pickup. No badges will be mailed in advance of ABACE2018.

Be advised that all company guests will be required to submit payment to secure their badge if the exhibitor’s badge allotment has been reached. To avoid this situation, please be sure to register all guests in advance through exhibitor registration.

If an exhibitor uses the services of an exhibitor-appointed contractor (EAC) during official show hours, the exhibitor must provide exhibitor badges for those personnel. These badges can be ordered online as part of the exhibitor’s total allotment of badges. During hours other than the official show hours, EACs are required to have EAC photo badges.

Catering

Exhibitors will have the opportunity to select between two different official catering companies for exhibit and/or chalet display space:

1. Hongqiao Jin Jiang Hotel (formerly the Sheraton)
2. Potel and Chabot

The above catering companies have been selected as the official and exclusive catering partners and are the only caterers permitted to work on site.

Cleaning – Chalets

Single-Unit Chalets

ABACE management will arrange for daily cleaning and removal of trash after show hours and prior to opening each show day. A one-time dusting and wipe down of the interior is also provided prior to the start of the event. Additional cleaning requirements in order to maintain chalet are the exhibitor’s responsibility.

Double-Unit and Triple-Unit Chalets

ABACE management does not provide cleaning and/or removal of trash for double- and triple-unit chalets. It is the exhibitor’s or stand builder’s responsibility to clean and remove all trash. If services are required, trash pick-up and removal forms can be found in the Exhibitor Kit under Freeman.

Co-exhibitors

Co-Exhibitors/Companies Sharing Exhibit Space

ABACE management must be advised in advance of any and all co-exhibitors/companies sharing exhibit space.

Please note the following rules regarding co-exhibitors:

• • • Chalet exhibitors are provided three complimentary co-exhibitor company profiles.
    • Co-exhibitors must have an existing corporate relationship between themselves and the contracted primary exhibitor.
    • Exhibitors must register all co-exhibitors online by February 9, 2018. This includes any exhibitor displaying the advertising or products/services of another company.
    • Failure to advise ABACE management of shared exhibit space in advance – including displaying the advertising of another company’s products or services – may result in a minimum additional charge of $4,625 per company, per stand and/or a minimum of $4,625 per company, per static display space.
    • All co-exhibitors must be members in good standing of AsBAA or NBAA.
    • All co-exhibitors must submit the ABACE2018 Co-Exhibitor Registration Form and payment of U.S. $500 to appear in the online exhibitor directory and the mobile app.
    • Co-exhibitors, like exhibitors, will need to log in to the Exhibitor Dashboard to update their company information online for the mobile app and online exhibitor directory.
    • Co-exhibitors are not allotted badges and should work through their primary exhibitors to secure badges.

Defacing Property

No holes may be drilled, cored or punched in the tent structure or ramp space. The use of adhesive-backed decals or similar items is also prohibited. All chalet units will be inspected prior to performance bond being returned. Any damage to the tent structure or ramp arising from failure to observe these rules will be deducted from the performance bond. More information will be provided in the Exhibitor Service Kit.

Direct Selling

No exhibitor is permitted to distribute materials outside of their assigned chalet, including areas outside of Shanghai Hawker Pacific Business Aviation Service Centre, without written approval from ABACE management.

Direct selling outside of the chalet or on the static display of aircraft is prohibited. This includes, but is not limited to, monetary transactions or exchanges of funds.

Advertising material of any description may be displayed and distributed only within the chalet space assigned to the exhibitor presenting such material. Canvassing by exhibitors outside their assigned chalet is prohibited. Distribution of publications and marketing materials outside of assigned chalet, including all stand-to-stand distribution, is also prohibited.

Canvassing and solicitation, except by exhibiting companies, are prohibited within 80 km (50 miles) of ABACE at Shanghai Hawker Pacific Business Aviation Service Centre and the static display of aircraft on Shanghai Hongqiao International Airport.

Exhibitors found in violation of these rules against direct selling are subject to a penalty equivalent to the cost of US $4,625.

Drawing Approval

Chalets: Custom Double- & Triple-Unit

For all custom double- and triple-unit chalets, exhibitors must submit scaled technical floor plans for approval to ABACE management no later than February 26, 2018.

Scaled floor plans must include:

• Event name and chalet exhibitor name
• Maximum number of occupants allowed
• Drawings with front and side elevations
• Structural engineer’s stamp certifying that the platform can bear the maximum occupant load
• Copy of the fireproof materials license indicating the building materials used (carpet, wood and paint) are fire retardant. A copy of this license must also be available on site during move-in.

Scaled floor plans must be submitted to ABACE management at [email protected] no later than February 26, 2018, with copies forwarded to:

Mega Expo Shanghai
Attn: Cathy Wang
Email: [email protected]
And
Freeman
Attn: John Reed
Email: [email protected]

Custom double and triple chalet designs are subject to approval by the local Shanghai Fire Safety Authority. Exhibitor and/or the EAC is responsible for any additional fees associated with the stand design approval.

EACs/Exhibitor-Appointed Contractors (EACs)/Stand Builders/Third-Party Contractors for Single-Unit Turnkey and Custom Double- and Triple-Unit Chalets

Chalet exhibitors using third-party companies to assist must adhere to the following rules & regulations:

Single-Unit Turnkey Chalets – EAC Supervisor Only

Single-unit turnkey chalet exhibitors are permitted to use third-party companies/EACs to assist during move-in/move-out provided they abide by the following rules & regulations:

• A maximum of two supervisors are permitted.
• Exhibitors must notify ABACE management and Freeman of their intent to use a third-party company for the interior design in writing no later than February 13, 2018.
• EAC supervisors must be qualified independent stand builders.
• EACs not based in China must be in country for a minimum of 24 hours prior to registering on site at ABACE.
• EAC supervisors are permitted on site to provide supervisory help only, cannot perform work and are permitted beginning Friday, April 13 at 08:00.
• EAC supervisors must comply with all insurance and performance bond rules.
• EAC supervisors must follow the EAC badging process.
• Photo ID badges: All EACs must wear photo ID badges during set-up and dismantling of exhibits at ABACE. The cost per badge is 200 RMB (approximately U.S. $29) and is payable only in cash on site.
• Exhibitor must submit on behalf of the EAC, notification on the exhibitor’s letterhead of its intent to use an exhibitor-appointed stand builder or EAC on or before February 9, 2018.
• EAC/stand builder insurance documentation: All third-party stand contractors and EACs must submit insurance documentation to ABACE management. Proper documentation must be provided to ABACE management in order to receive the link for the online photo ID badging process, including EAC form and insurance documentation. Once ABACE management receives the completed EAC forms and supporting insurance documentation and information has been verified, a direct link to the online photo badge registration system will be forwarded via email. Contractors will be required to upload photographs for each badge requested. All photo ID badges will be held for on-site pickup at the “Contractors Badge and Performance Bond” service desk area located at the Shanghai Hawker Pacific Business Aviation Service Centre hangar. Exhibitors must submit a completed EAC form along with proof of the EAC’s insurance in order to register for their photo identification badges.
• EAC supervisors must provide proof of the exhibitor-appointed contractor’s workers’ compensation insurance with the limit to be at least 1,000,000 RMB; employer’s liability and general liability limit to be at least 1,000,000 RMB.
• EAC badge orders will not be accepted until all required EAC information, including insurance certificates, have been submitted to ABACE management.
• Exhibitors who reserved single-unit turnkey chalets are not permitted to use EACs for chalet design, but are permitted to have a maximum of two supervisors.

• All stand contractors and EACs must pay performance bond deposits and non-refundable management fees prior to move-in.

• Single-Unit Turnkey Chalet Performance Bond and Management Fee:
  

  Performance bond deposit:	18,000 RMB
  Non-refundable management fee:	2,000 RMB

Double- and Triple-Unit Custom Chalets

Exhibitors who reserved double- or triple-unit custom chalets are permitted to use an exhibitor-appointed contractor (EAC)/stand builder to design and build their chalet interiors, however Freeman is the exclusive provider of all chalet structures. Exhibitors using third-party companies must adhere to the following rules & regulations:

• Exhibitor-appointed contractor (EAC)/stand builder supervisors must be qualified independent stand builders.
• Exhibitors must notify ABACE management and Freeman of their intent to use a third-party company for the interior design in writing no later than February 9, 2018.
• Exhibitor-appointed contractors must comply with all insurance and performance bond rules.
• EACs not based in China must be in country for a minimum of 24 hours prior to registering on site at ABACE.
• Photo ID badges: All EACs must wear photo ID badges during set-up and dismantling of exhibits at ABACE. The cost per badge is 200 RMB (approximately U.S. $29) and is payable only in cash on site.
• Exhibitor must submit on behalf of the EAC, notification on the exhibitor’s letterhead of its intent to use an exhibitor-appointed stand builder or EAC on or before February 9, 2018.
• EAC/stand builder insurance documentation: All third-party stand contractors and EACs must submit insurance documentation to ABACE management. Proper documentation must be provided to ABACE management in order to receive the link for the online photo ID badging process, including EAC form and insurance documentation. Once ABACE management receives the completed EAC forms and supporting insurance documentation and information has been verified, a direct link to the online photo badge registration system will be forwarded via email. Contractors will be required to upload photographs for each badge requested. All photo ID badges will be held for on-site pickup at the “Contractors Badge and Performance Bond” service desk area located at the Shanghai Hawker Pacific Business Aviation Service Centre hangar. Exhibitors must submit a completed EAC form along with proof of the EAC’s insurance in order to register for their photo identification badges.
• EAC badge orders will not be accepted until all required EAC information, including insurance certificates, have been submitted to ABACE management.
• Third-party supervisors must provide proof of the exhibitor-appointed contractor’s workers’ compensation insurance with the limit to be at least 1,000,000 RMB; employer’s liability and general liability limit to be at least 1,000,000 RMB.
• All stand contractors and EACs must pay a performance bond deposit and a non-refundable management fee prior to move-in.
• Double- and Triple-Unit Custom Chalet Performance Bond and Management Fee:
  

  Performance bond deposit:	75,000 RMB
  Non-refundable management fee:	10,000 RMB

Electricity – Chalets

Single-Unit Turnkey Chalets

Single-unit turnkey chalets will receive power for:

• One 42-inch plasma
• One large refrigerator
• Four wall-mounted air conditioners
• 24 halogen lights
• Four 15-amp single phase 220V outlets

Any additional power needs will be the responsibility of the exhibitor.

Power will be turned on Monday, April 16 from 08:00 – 17:00.

On show days, power will be turned on one hour prior to show opening and turned off one hour after show closing.

If power is required outside of these hours, additional generator run time charges will apply and be billed to the exhibitor.

Double- and Triple-Unit Custom Chalets

Exhibitors in double- and triple-unit custom chalets should contact Rick Halvorson with Freeman at [email protected] to discuss your electrical requirements and to obtain a quote.

Exhibit Hours

Exhibitor Service Desk

ABACE management provides a designated on-site area where exhibitors can order supporting items and services for their exhibits from ABACE-preferred and exclusive service suppliers. The Exhibitor Service Desk will be conveniently located in a tent near the Shanghai Hawker Pacific Business Aviation Service Centre.

Exhibitor Service Desk Schedule

Exhibitor Service Kit

The ABACE Exhibitor Service Kit, available in the Exhibitor Dashboard, will provide detailed information and order forms for services including the following:

• • • Audio-visual equipment
    • Carpeting
    • Catering
    • Chalet information and additional offerings
    • Cleaning Services
    • Customs
    • Electricity
    • Floral
    • Freight forwarding
    • Furniture
    • Hostesses
    • Insurance
    • Internet access
    • Shipping
    • Turn-key exhibitor packages
    • Visa invitation letters

The Exhibitor Service Kit should be used for budgeting purposes only. No orders may be placed until after exhibitors receive stand confirmations.

Extended Hours

All EAC’s/stand builders/exhibitors may request to work beyond the posted move-in hours. Requests must be sent to [email protected] and appropriate fees paid. Requests for extended work hours will be reviewed by ABACE management and are subject to the fees listed below.

Extended Hours Fees:

Application and payment in cash received before 14:00:   3,000 RMB

Application and payment in cash received after 14:00:       5,000 RMB 

• Please note that 22:00 is the latest permitted time to work.
• Also, please note that these rates are daily overtime rates.

EAC Fees

Performance Bond – Single-Unit Turnkey Chalets

(A maximum of two supervisors are permitted)

Performance Bond – Custom Double- and Triple-Unit Chalets

• Exhibitors are responsible for any damage to the chalet and ramp space facilities caused by exhibitors, their agents, contractors or employees.
• Exhibitors who choose to rent stands or any components for their exhibit display shall be responsible for any damage to rented items caused by exhibitors, their agents, contractors or employees.
• The performance bond and management fees must be paid in cash and on site at the “Contractor Badge and Performance Bond” service desk area located at the Shanghai Hawker Pacific Business Aviation Service Center Hangar.
• EACs shall dismantle their chalets in the timeframe specified and confirmed by show management. The dismantling shall be quick and well organized, and must not obstruct or block exits or cargo doors. All chalet materials, including all debris (wood, nails, screws, etc.), must be removed from the ramp. Further move-in and move-out details will be included in the Exhibitor Service Kit.
• The performance bond, less the non-refundable management fee, will be returned at the completion of move-out, on Friday, April 20, 2018 after the tenancy, provided there is no claim indemnity caused by the exhibitor/stand builder’s behavior or negligence.

For more information, review the Exhibitor Service Kit.

EAC Badges

Photo ID Badges: The cost per badge is 200 RMB (approximately U.S. $29) and is payable only in cash on site.

If an exhibitor utilizes the services of an EAC during official show hours, the exhibiting company must provide exhibitor badges for those personnel. These badges can be ordered online as part of the exhibitor’s total allotment of badges. During hours other than official show hours, EACs are required to wear set-up and teardown EAC photo ID badges.

Fapiao

Exhibitors requiring fapiaos should advise ABACE exhibits team in advance so that billing information can be provided in RMBs.

ABACE Management must submit tax applications to the Chinese tax bureau subsequent to ABACE for approval to issue a fapiaos. The approval and issuing process has taken about four months based prior experience. Thank you for your patience. If you have additional questions, please feel free to contact Evelyn Wu at [email protected] or call +86 21 2234 1801.

Fire Safety

All exits and exit aisles in the chalets must be kept clear and unobstructed. No furniture, signs, easels, chairs or displays may protrude into aisles. Fire hose cabinets, fire extinguishers, sprinklers or any other fire-safety device must not be hidden, obstructed or otherwise disturbed. All materials used in exhibit construction, decoration or as temporary cover must be certified as flame retardant. Flammable fluids, substances or materials of any nature may not be used. All materials and installations must comply with the Shanghai Hawker Pacific Business Aviation Service Centre fire preventions regulations.

First Aid

First aid supplies can be found in the ABACE registration area during move-in, move out and on show days. In the event of a first aid emergency, ABACE management will contact Shanghai municipal emergency services.

Furniture Procedures – Chalets

Exhibitors who reserved double- or triple-unit custom chalets are permitted to source their own furniture and must adhere to the following rules:

• Third-party furniture suppliers are considered exhibitor-appointed contractors and all insurance and performance bond rules apply.
• Third-party furniture is considered freight and normal and customary material handling charges will apply.
• Furniture pick-up must occur between 08:00 and 10:00 on Friday, April 20. Late pick-ups will result in the loss of the EAC performance bond and additional charges for labor and storage.

Exhibitors who reserved single-unit turnkey chalets are not permitted to source their own furniture.

Mailing List Updates

Contact the ABACE U.S.A. office to correct your mailing address, or if you no longer wish to receive ABACE materials. Please send the address panel with corrections noted to:

By Mail
ABACE U.S.A. Office
Attn: Courtney Oliveira
1200 G Street NW, Suite 1100
Washington, DC, 20005
USA
Or by email to: [email protected]

Marshaling Yard Fee

In order to facilitate a smooth freight move-in for ABACE, a marshaling yard has been designated approximately 6 km away from the Shanghai Hawker Pacific Business Aviation Service Centre facility. A detailed map and truck move-in procedure will be included in the Exhibitor Service Kit. Contractors will be assessed ______ RMB to access the marshaling yard.

Membership

All exhibitors must be members in good standing of either NBAA or AsBAA.

Mock-ups

Aircraft mock-ups are permitted in the indoor hangar and exhibitor pavilion and on the static display.

Move-in

Single-unit Turnkey Chalet – Move-in begins on Friday, April 13, 2018 and the following schedule of move-in/set-up hours are permitted:

Double- and Triple-unit Custom Chalets – Move-in begins at 12:00 on Wednesday, April 11, 2018. The following schedule of move-in/set-up hours are permitted:

If the chalet space is not occupied by this time, ABACE management will consider it canceled by the exhibitor and assumes the right to use such space as deemed appropriate.

All EAC’s/stand builders/exhibitors may request to work beyond the posted move-in hours. Requests must be sent to [email protected] and appropriate fees paid. Requests for extended work hours will be reviewed by ABACE management and are subject to the fees listed below.

Extended Hours Fees:

Application and payment in cash received before 14:00:   3,000 RMB

Application and payment in cash received after 14:00:       5,000 RMB

• Please note that 22:00 is the latest permitted time to work.
• Also, please note that these rates are daily overtime rates.

Move-out

All chalets must remain staffed and in place until the show closes at 15:00 on Thursday, April 19, 2018, and exhibitors may not begin dismantling their exhibits before 15:00.

Move out for all chalet exhibitors will begin at 15:00 on Thursday, April 19, 2018.

Single Turnkey – Move-out begins on Thursday, April 19, 2018 at 15:00. The following schedule for move out must be followed

ABACE management will direct the official freight forwarder for ABACE to ship (freight collect) packages, cartons, crates, etc. left in the Chalet beyond the days and times of dismantling. ABACE management will begin returning empty containers as soon aircraft are removed from the static display.

Detailed information on freight and material handling will be provided in the Exhibitor Service Kit.

Noise Levels

Noise levels within the exhibitor’s space should not exceed 80 decibels and must not interfere with the conduct of business of neighboring displays. ABACE management reserves the right to enforce compliance of this rule.

Official Service Contractor

To ensure orderly and efficient installation, operation and removal of displays, and to eliminate confusion, ABACE management has designated Freeman and other firms listed in the Exhibitor Service Kit as official service contractors. ABACE management holds these firms responsible for quality service and fair prices, and will intercede on behalf of an exhibitor in the event of faulty work or unfair charges. ABACE management encourages all exhibitors to place orders with these firms, unless a permanent arrangement has been established with a display house or outside contractor to set up and dismantle exhibits.

Freeman Contacts

Roxanne Ebbers
Vice President, Client Solutions
Email: [email protected]
Tel: +1 (702) 491-7796

Chalet Exhibitor Contacts
John Reed
Business Development Director
Email: [email protected]
Tel: +1 (214) 445-1261

Parking

With the exception of chalet exhibitors, there is no parking available at the Shanghai Hawker Pacific Business Aviation Business Centre facility. There are a few parking spaces located outside of the facility, and pay lots located four to five blocks away.

There will be a limited number of “drop-off only” passes available for purchase by exhibitors at the cost of 800 RMB. These passes permit convenient drop-off for passengers right outside the FBO security gate and are valid only on show days – Tuesday, April 17; Wednesday, April 18; and Thursday, April 19. These passes do not provide access to the FBO or into ABACE.

Drop-off passes will be available for purchase through the Exhibitor Badge Registration located in the Exhibitor Dashboard, while supplies last. For more information, contact NBAA’s Maureen Cameron at [email protected].

Payment Methods

Payments for ABACE exhibit space may be made by company check, bank wire transfer or credit card. Credit card payments in excess of U.S. $20,000 are subject to a 3% processing fee.

VAT of 6.45% will be added to all exhibit applications. In some cases, you may be able to deduct the VAT paid to NBAA from your VAT remittance to the Chinese Tax Authority. Please consult your tax advisor for further guidance.

All payments for ABACE should be made in U.S. dollars (subject to the applicable PRC law, if such law requires otherwise). 

Payments made by wire transfers must include a U.S. $30 wire processing fee.

All exhibitors and co-exhibitors must be current on all accounts with AsBAA and NBAA and paid in full for their exhibit space in order for space to be assigned.

Bank Wire Transfer Instructions
Bank of America
730 15th Street NW
Washington, DC, 20005
USA
Routing #: 026009593
Account Name: National Business Aviation Association, Inc.
Account #: 2404389
Swift Code: BOFAUS3N

Please contact the ABACE exhibits team [email protected] to secure an invoice number prior to making a bank wire transfer. Also, please indicate on the wire transfer the company name, invoice number and reference for payment (i.e., exhibit space, static display space). All wire transfers should be made in U.S. dollars and should be net of all bank fees.

Performance Bond

Single-Unit Turnkey Chalet Performance Bond and Management Fee

(A maximum of two supervisors are permitted)

Custom Double- and Triple-Unit Chalet Performance Bond and Management Fee

• Exhibitors are responsible for any damage to the chalet and ramp space facilities caused by exhibitors, their agents, contractors or employees.
• Exhibitors who choose to rent any components for their chalet shall be responsible for any damage to rented items caused by exhibitors, their agents, contractors or employees.
• Exhibitors and stand builders who occupy “raw” space are required to pay a performance bond of 20,000 RMB, which includes a 2,000 RMB management fee, prior to move-in.
• The performance bond and management fees must be paid in cash and on site at the “Contractor Badge and Performance Bond” service desk area located at the Shanghai Hawker Pacific Business Aviation Service Center Hangar.
• EACs shall dismantle their chalets in the timeframe specified and confirmed by show management. The dismantling shall be quick and well organized, and must not obstruct or block exits or cargo doors. All chalet materials, including all debris (wood, nails, screws, etc.), must be removed from the ramp. Further move-in and move-out details will be included in the Exhibitor Service Kit.
• The performance bond, less the non-refundable management fee, will be returned at the completion of move-out, on Friday, April 20, 2018 after the tenancy, provided there is no claim indemnity caused by the exhibitor/stand builder’s behavior or negligence.
• A walkthrough will be conducted with the exhibitor prior to move-in and an inspection will take place after move out and prior to the return of the performance bond.
• Chalets must be left in the condition in which they were received.

For more information, review the Exhibitor Service Kit.

Safety Regulations for Double- and Triple-Unit Custom Chalets

Materials, carpets and display items used for construction and publicity shall be of low flammability and with the fireproof reports issued by the fire department. Open flame and flammable, explosive, radioactive, poisonous or corrosive items are not permitted at ABACE.

The use or display of electric arc, welding flame, high voltage electrical appliances, neon lights or similar items require advance approval from ABACE management.

When designing double- and triple-unit custom chalet interiors, please be sure to refer to the stand configurations and drawing approval sections of the Exhibitor Service Kit to ensure that chalet designs conform to rules and regulations.

All double- and triple-unit custom chalets require technical drawings to be approved in advance. Drawings must be submitted online no later than February 26, 2018.

Security

While ABACE2018 exhibits and chalets are open, a limited amount of perimeter security staff will be provided. ABACE security officers will be on duty for the static display area from 18:00 on Saturday, April 14, 2018, to 15:00 on Thursday, April 19, 2018.

Exhibitors are advised to obtain additional insurance coverage in advance to cover losses such as theft, fire and damage to property. Order forms for additional security will be available in the Exhibitor Service Kit.

Shipping/Storage

Detailed shipping information will be included in the Exhibitor Service Kit.

Official Freight Forwarder – U.S. Exhibitors
TWI Group, Inc.
4480 S. Pecos Road
Las Vegas, NV 89121
Tel: +1 (702) 691-9000
Fax: +1 (702) 691-9045

Contact: Tyler Hunt
Tel: +1 (702) 691-9091
Email: [email protected]

Customs
APT Showfreight Logistics
Tel: +86 21 6124 0090
Fax: +86 21 6124 0091

Contact: Janson Zhu
Tel: +86 21 6124 0090 Ext. 307
Email: [email protected]

Staffing

Chalet areas must be fully staffed during official exhibit hours.

Exhibitors will be admitted at 08:00 each show day for early preparations of displays only. Chalets must remain staffed and exhibits must remain in place through 15:00 on Thursday, April 19, 2018.

No activities, except stand preparations, are to be scheduled in the exhibit areas at any time other than official exhibit hours.

ABACE management reserves the right to make changes to the exhibit hours with advance notice.

Exhibitors found to have dismantled their stands prior to 15:00 on Thursday, April 19, 2018, will be ineligible for the indoor priority lottery for ABACE2019 and will be subject to an early tear-down penalty of US $4,625.

Terms & Conditions

All ABACE exhibitors must agree to and comply with the Terms and Conditions posted on the ABACE website and included within the exhibit application.

Trademark Usage

The ABACE name and logos (the “ABACE marks”) are registered trademarks of NBAA. ABACE2018 exhibitors are encouraged to use the ABACE name and the logos available in the Exhibitor Dashboard to promote participation in the show. Exhibitors may not alter the logos in any way or use the ABACE marks to imply any endorsement or partnership with ABACE or NBAA without advance permission. Exhibitors may not use the ABACE marks or any variations in connection with the promotion or operation of other events.

Unmanned Aircraft Systems (UAS), Remote-Controlled Aircraft and Helium Balloons

For the safety of attendees, flying objects, including unmanned aircraft systems (UAS), remote-controlled aircraft and helium balloons, are not permitted in chalets or on the ramp. UAS may be displayed in chalets provided they are stationary, fit within purchased exhibit space and comply with all relevant safety requirements.

Value Added Tax (VAT)

Effective August 2013, the Chinese Tax Authority began to levy value added tax (VAT) on certain services previously subject to business tax on a nationwide basis. The VAT rate is 6.45% and is added to your invoice. In some cases, you may be able to deduct the VAT paid to NBAA from your VAT remittance to the Chinese Tax Authority. Please consult your tax advisor for further guidance.

Visa Invitation Letters

Attendees from countries requiring Chinese visas to attend ABACE must have an invitation letter from authorities in China in order to obtain their visa. Attendees may request such a letter by using the ABACE invitation letter request form, which will be available in November 2017. The National Business Aviation Association (NBAA) will forward requests to the appropriate Chinese Authorities, who will then issue the ABACE invitation letter. Please be advised that it will take approximately 4 weeks to process requests. The invitation letter will then be sent to you via email to download.

Please note: Passports must be valid for at least six months after the date of your arrival in China.

Only registered attendees for ABACE2018 are eligible to request ABACE invitation letters.

The information provided is meant to facilitate the visa application procedure. NBAA will not be in a position to intervene in any decision made by the Chinese authorities. In addition, please be advised that all ABACE attendees must comply with Chinese laws and regulations during their stay in China and may not engage in activities which might damage China’s national security or public interests. Attendees from foreign countries must be responsible for all their own costs while in China, and must be willing to bear the corresponding legal and economic responsibilities should any problems arise.

The processing fee to obtain an invitation letter from the Chinese authorities is U.S. $30.00 plus 6.45% VAT per person. A credit card number should be provided when requesting the visa invitation letter and, upon receipt of the invitation letter, your credit card will be charged for this fee.

Waste Removal

In order to limit costs for waste removal, it is recommended that exhibitors and stand builders use recyclable materials for stand construction whenever practical. More information will be available in the Exhibitor Service Kit.

Chalet exhibitors found to be in violation of the rule requiring removal of all trash will forfeit all or a portion of their performance bond deposit.